Aqara Hub M3 Now Bridges G100 Camera Into Matter
Aqara is rolling out a software update that lets its Hub M3 bridge existing security cameras into Matter, starting with the budget Camera G100. The move gives owners of Aqara’s cheapest camera a local, cross-platform video feed without buying new hardware, and it arrives just as Matter cameras are starting to appear across the major smart home platforms.
The update, reported by Matter Alpha on November 17, 2026, turns the Hub M3 into a Matter bridge for cameras. Once a camera is bound to the hub in the Aqara app, it shows up as a standard camera endpoint in connected Matter ecosystems, which can then discover it automatically. For now, the G100 is the only camera officially supported, and each Hub M3 can bridge up to four of them.
What the update changes for G100 owners
The Camera G100 is a wired indoor and outdoor camera that records in 2K (2304 x 1296), with a 140-degree field of view, IP65 weather protection, Wi-Fi 6, two-way audio, a spotlight, and local recording to a microSD card of up to 512GB. It also supports HomeKit Secure Video. What it has never had is a native Matter connection: until now, getting its feed into SmartThings or Home Assistant meant relying on Aqara’s own app or platform-specific integrations.
With the new firmware, that changes. Aqara added a menu in its device settings for selecting and binding a camera to the Hub M3. After updating the firmware on both the hub and the camera, the G100 appears in Matter ecosystems as if it were a native Matter camera. According to Matter Alpha’s early testing, the streaming experience mirrors native Matter cameras such as Aqara’s own Camera Hub G350, with smooth, fast local video.
The practical appeal is the price. The G100 sells for around $39.99, making it one of the cheapest cameras that can now feed video over Matter. Owners who already have a Hub M3 and a G100 get the upgrade for free, with no new hardware to buy and no subscription required for the bridging itself.
The Home Assistant catch
There is one wrinkle, and it matters for the platform many Aqara enthusiasts actually use. In Matter Alpha’s testing, the bridged G100 worked properly through SmartThings and through the Open Home Foundation Matter Server, but streams failed to load in Home Assistant Core. The report describes it as a bug in Home Assistant Core rather than a problem with Aqara’s implementation, which means a fix would need to come from the Home Assistant side.
That is worth knowing before updating with expectations set. The camera is still discovered by Home Assistant automatically; it is the live stream that does not load yet. SmartThings users, by contrast, get the full experience today. Given how quickly Home Assistant has been adding Matter camera support — version 2026.11 added Matter 1.5 cameras with live video and snapshots — a fix is plausible in an upcoming release, but Aqara and Home Assistant have announced no timeline.
Why bridge a camera instead of building Matter in?
Running Matter natively on a camera is expensive in engineering terms. The protocol stack has to run alongside video encoding and streaming, which demands meaningful processing power. Aqara’s reasoning, as reported by Matter Alpha, is that the ongoing chip shortage driven by AI demand has pushed bill-of-materials costs up significantly, sometimes by as much as 50 percent. Adding a native Matter camera stack to an entry-level camera like the G100 would have made it far more expensive to build, on top of the software development and certification burden.
Bridging sidesteps that problem. The Hub M3 takes on the heavy Matter processing, and the camera only needs to talk to the hub. It is the same logic that has made bridges the standard route for Zigbee sensors and other low-power devices: put the complex protocol work on one capable box, and keep the endpoints cheap and simple.
The approach is not unique to Aqara. Open-source projects such as Matterbridge have already shown that ordinary RTSP cameras can be brought into Matter the same way. What is new here is a mainstream manufacturer shipping it as a first-party feature for its own hardware, with setup handled inside its own app rather than a community project. The economics also explain why large players can afford a different answer: Walmart, working with Google, has subsidized a native Matter camera to keep its price under $25, something smaller manufacturers cannot match.
What comes next
Aqara’s own feature description mentions both cameras and doorbells, which suggests the G410 Doorbell Camera Hub could receive bridging support later. Aqara has not announced a timeline for extending support to other models, and the G100 remains the only one on the list for now.
The broader context is that Matter cameras are still early. SmartScene reported on November 14 that SmartThings was the only major platform actually showing Matter cameras at the time, and Google Home still does not support Matter camera feeds from non-Nest devices. Apple, meanwhile, continues to route its cameras through HomeKit Secure Video. Aqara’s bridge does not solve those platform gaps on its own, but it does widen the hardware side of the equation: a $40 camera can now join the Matter camera conversation wherever the platform is ready.
For existing Aqara households, the calculation is simple. If you already own a Hub M3 and one or more G100 cameras, update both firmwares and bind the cameras in the Aqara app. If your platform of choice is SmartThings, the feed should work now. If it is Home Assistant, it is worth waiting for the streaming bug to be fixed before counting on it. And if you are shopping for a cheap camera with an eye on Matter, the G100 just became a more interesting option than it was a week ago — provided you have, or plan to buy, the hub that makes it work.