HAOJAI Launches Matter Smart Switch With 6 Scene Buttons
HAOJAI has released a new Matter over Thread wall switch that puts physical scene control back at the centre of the smart home. The HAOJAI Matter Smart Switch combines six programmable buttons, three relay channels and a proximity sensor in a single mains-powered wall plate, and it needs no proprietary app to work. The launch was detailed on November 9, 2026, in an announcement from Nordic Semiconductor, whose nRF54L15 chip powers the device.
It is a deliberately simple idea: a familiar light switch, rebuilt as a control point for an entire Matter home. Instead of opening an app or talking to a speaker every time you want to change the mood of a room, you press a button on the wall. HAOJAI is betting that, even in 2026, that is still the fastest way to run a home.
What the switch actually does
The headline feature is the six fully programmable buttons. Each one can be configured to control Matter-compatible devices or trigger scenes and automations across the home. HAOJAI says the buttons can be set up to control thousands of Matter-compatible devices, so a single wall plate can reach well beyond the lights on its own circuits.
Behind the buttons sit three physical relay channels, which switch real loads directly, and a proximity sensor that lights up the panel as someone approaches. The sensor is not just a night light: it can also feed automations of its own. HAOJAI gives the example of a door opening triggering a “home arrival” scene, so the switch reacts to the household, not only to being pressed.
Setup happens in the smart home app you already use, rather than in a HAOJAI app. A typical example from the announcement is a “goodnight” button that turns off the downstairs lights, dims the bedroom lighting, closes the curtains and arms the home security system — one press, four jobs, no voice command required.
Matter over Thread, with no app lock-in
The switch is Matter certified and runs over Thread, the low-power mesh network Matter was designed for. Because it is mains powered, it can also serve as a robust node in the Thread mesh, strengthening the network for battery-powered sensors and locks nearby, rather than depending on it.
Compatibility covers the four major ecosystems: Apple Home, Google Home, Samsung SmartThings and Amazon Alexa. Since the switch speaks Matter directly, it joins whichever platform the household already runs, and it can be shared across platforms through Matter’s multi-admin feature. There is no HAOJAI account or app standing between the switch and the home.
That matters because the wall switch is one of the few smart home devices every person in a house touches — including guests, children and anyone whose phone is in another room. A Matter-native switch keeps that shared control point working even if a vendor’s cloud service has a bad day.
The chip inside: Nordic’s nRF54L15
The switch runs on Nordic Semiconductor’s nRF54L15 system-on-chip, a multiprotocol part built for exactly this kind of device. It pairs an Arm Cortex-M33 processor running at 128 MHz with a RISC-V coprocessor for software-defined peripherals and time-critical tasks, plus 1.5 MB of non-volatile memory and 256 KB of RAM. That headroom is what lets the switch run the Matter stack, the proximity sensing and the button logic on one chip, with room for future software updates.
Nordic also points to the chip’s radio sensitivity, which helps the switch hold a reliable Thread connection across the home — important for a device that is expected to act as part of the mesh infrastructure, not just as an endpoint.
HAOJAI built the switch’s firmware with Nordic’s nRF Connect SDK. According to Sara Ma, Overseas Marketing Manager at Shenzhen Haojai Lianchuang Technology, the SDK let the team spend about 80 percent of its effort on the user experience and hardware integration, while the SDK handled memory and resource management, security and device attestation, and direct over-the-air firmware updates. OTA support means the switch can gain features and security fixes after installation, without being removed from the wall.
Why a wall switch still matters in 2026
Smart home control has spent years drifting toward phones and voice assistants, but the wall switch never went away — it is where people instinctively reach when they enter a dark room. The problem with most smart switches is that they control one circuit and nothing else. A scene controller like HAOJAI’s breaks that limit: the same press that turns off a light can also lock the doors and lower the blinds.
The timing is good. Matter’s device catalogue has grown steadily since the standard launched, and multi-button controllers are one of the categories where the standard’s cross-platform promise is most visible: buy one switch, use it with Apple Home today and SmartThings tomorrow, without rewiring anything. HAOJAI’s entry adds a Thread-native option to a shelf that has been dominated by Zigbee and Wi-Fi scene controllers, and its three relay channels mean it can replace an existing multi-gang switch rather than sitting beside it.
There is also a quieter benefit. Because the switch is mains powered and always on the Thread mesh, it strengthens the network every home with battery sensors depends on. Thread networks get more reliable as more mains-powered devices join them, and a wall switch in every room is an easy way to add that backbone.
What we still don’t know
The announcement leaves the two questions buyers will ask first unanswered: price and availability. Nordic’s release gives no price, no launch date and no list of regions where the switch will be sold. HAOJAI is based in Shenzhen, and it is not yet clear whether the switch will reach North American or European retail, or remain a product for its home market and specialist importers at first.
Other details are also unconfirmed, including the switch’s physical format, finish options and whether the six buttons support press-and-hold or multi-press gestures on top of a simple tap. Those are the kinds of details that decide whether a scene controller feels fast in daily use, so they are worth checking before buying.
What to watch next
The switch is a small product, but it is a useful signal. Nordic’s nRF54L15 is showing up in a growing range of Matter devices, and the company announced its nRF71 series — combining Wi-Fi, Bluetooth Low Energy and Thread on one chip — on November 3, 2026. The silicon underneath Matter devices is getting more capable and more consolidated, which is what makes products like a six-button Thread switch practical at all.
For now, the HAOJAI Matter Smart Switch is one to watch for anyone building a Matter home around physical controls. If the price lands sensibly and it reaches Western retail, it could be one of the most useful wall plates in a Thread home: a light switch, a scene controller and a mesh node in a single gang. We will update this article when pricing and availability are confirmed.
Source: Nordic Semiconductor, “Nordic-powered Matter over Thread switch provides fully customizable smart home automation and scene control using nRF54L15 multiprotocol SoC,” November 9, 2026.